Wave-absorbing material is a noise-reduction magnetic film made of soft magnetic powder and resin in a certain proportion.It has high permeability and soft sides covered with double-sided tape.Just paste it in the right position and it has excellent noise suppression.
Main components of Penghui RMS120 series EMI absorber pieces by iron based alloy soft magnetic powder and environmental friendly polymer materials through a series of complex production process (iron based alloy soft magnetic powder production raw material check ingredients crushing forming tape cutting inspection packaging delivery); Penghui is one of the few enterprises in China from the source of magnetic powder production to rapid and stable molding, and then to the absorption of customized processing one-stop.
The initial magnetic permeability of the RMS120 series of wave absorption films is 120, It also has a high magnetic loss, with good absorption effect and electromagnetic loss performance of 10Mhz-6Ghz, ultra-thin thickness can bring good electromagnetic absorption loss effect, the RMS120 series of wave-absorbing films, thin est 0.05mm, commonly used unadhesive thickness including 0.05mm, 0.1mm, 0.2mm, 0.3mm, 0.5mm, used to solve laptops, mobile phones, communication cabinets, vehicle devices, wearable devices, Intelligent equipment, EMI problems arising between the internal cavity of medical devices, GPS, chips, flash memory, FPC wiring, batteries, and components.
The loss mechanism of the wave-absorbing chip can be roughly divided into the following three categories:
EMI absorber material is a functional composite material that mainly absorbs electromagnetic waves. It eliminates the back and forth reflection of electromagnetic waves in the shielding cavity, reduces the interference of clutter to its own equipment, and effectively prevents electromagnetic radiation from harassing and harming surrounding equipment and personnel. It is an advanced means of eliminating electromagnetic wave pollution. Applying EMI absorber materials to electronic equipment can absorb leaked electromagnetic radiation and achieve the purpose of eliminating electromagnetic interference.
According to the law that electromagnetic waves propagate in the medium from low-magnetic to high-permeability, high-permeability ferrite is used to guide electromagnetic waves, and through resonance, a large amount of radiation energy of electromagnetic waves is absorbed, and then the energy of electromagnetic waves is converted into heat energy through coupling to eliminate intelligence For the excess radio waves in the electronic system, the EMI absorber material can be cut and formed, and attached to the back of the touch panel or on the cable to resist electromagnetic interference EMI and optimize the performance of the touch screen.
Projected capacitive touch screens of smart electronic devices are susceptible to electromagnetic interference, and EMI voltages from both internal and external sources are capacitively coupled to the touch screen device. These EMI voltages can cause phone motion within the touch screen, which can confuse the measurement of charge motion when a finger touches the screen, affecting the sensitivity and touch accuracy of the touch screen. The solution can be to use EMI absorber materials to absorb electromagnetic waves and eliminate interference.
Shielding materials are a class of materials that can isolate metals, magnetic fields, electromagnetic waves, and control electric fields between two spatial regions, and induce and radiate from one region to another. Specifically, the material used to make the shield. The shielding body surrounds the interference sources of components, circuits, assemblies, cables or the entire system to prevent the interference electromagnetic field from spreading outward, and wraps the receiving circuit, equipment or system with the shielding body to prevent it from being affected by the external electromagnetic field. The electromagnetic wave of the absorbing material cannot go in and out, but the electromagnetic shielding material does not necessarily reflect the electromagnetic wave, but reduces the amount of the electromagnetic wave reaching the other side of the shielding material through absorption or reflection. It can be said that the absorbing material is to make the same side of the absorbing material and the electromagnetic wave source to receive the reflected electromagnetic wave as little as possible, and the electromagnetic shielding material is to shield the material from the opposite side of the electromagnetic wave source, so as to receive as little influence of the electromagnetic wave as possible.
PH mainly produces absorbing sheet, EMI suppression sheet, sintered ferrite sheet, electromagnetic shielding coating and other electromagnetic functional materials. It is the first national high-tech enterprise in China that focuses on the R&D, production and sales of sheet absorbing materials and electromagnetic shielding coatings. The products are sold to all over the world and are well received by the industry.
We provide innovative solutions for sustainable progress. Our professional team works to increase productivity and cost effectiveness on the market